Analysis of some deviations of slitting machines
Oct 12, 2023
Leave a message
The tail of the slitting machine blade slitting the cardboard is deflected:
1. The paper feeding positioning baffle of the slitting machine blade is improperly adjusted; 2. One section of the slitting blade is too blunt, and the linear speed of the slitting machine blade is different from that of other knives; 3. The paper guide wheel of the slitting machine blade is improperly adjusted; 4. Slitting The machine blade feeds paper incorrectly.
The slitting machine blade produces burrs:
1. The blade of the slitting machine is blunt and should be polished; 2. The overlap between the blade of the slitting machine and the slot is too shallow; 3. The edge of paper and paper wool are caught in the slot of the blade of the slitting machine, which should be thoroughly cleaned before turning on the machine; 4. The gap between the blades of the slitting machine is too large and should generally be no more than 2.5mm.
The indentation line of the slitting machine blade is easy to break:
1. The base paper is inferior; 2. The creasing line is too deep.
The indentation lines of the slitting machine blade are not straight:
1. The cutting line of the slitting machine blade is too shallow and the fold line is uneven, which affects the appearance of the box; 2. The paper feeding of the slitting machine blade is skewed; 3. The upper and lower pressing wheels of the slitting machine blade are not adjusted.
The cutting edge of the slitting machine blade is not vertical:
1. The angle of the slitting machine blade holder is incorrect; 2. The slitting machine blade is not in the center of the knife groove; 3. The slitting machine blade blade is ground off-center.

