High speed leveling and shearing line

Mar 06, 2024

Leave a message

1. Material feeding: Metal materials are fed into the feeding system of the leveling and shearing line, usually in the form of coils or sheets.

2. Leveling: After entering the leveling shear line, the material is processed by the leveling mechanism. The leveling mechanism uses rollers or rollers to exert pressure and bending force on the material to eliminate bending and warping in the material.

3. Shearing: After leveling, the material enters the shearing mechanism. The shearing mechanism usually consists of an upper knife and a lower knife, which clamp and cut the material through up and down movements. The shearing mechanism of a high-speed leveling shear line is usually equipped with a high-speed rotating blade to achieve efficient cutting.

4. Discharge: After the cutting is completed, the cut material is sent out of the leveling and shearing line, usually through a conveyor belt or other discharging system.

https://www.wxjyequipment.com/

Rotary-Flying-Shear-Cut-to-Length-Line

Send Inquiry