How to maintain the slitting machine line

The maintenance of the slitting machine is very important to ensure its stable performance and extend its service life. The following are some main maintenance measures:

1. Daily maintenance

Cleaning equipment: After work every day, the dust, oil, metal debris and other debris on the surface of the slitting machine should be cleaned in time. You can use a clean rag or compressed air to clean it to ensure that the surface of the equipment is clean and tidy and prevent debris from entering the interior of the equipment and affecting its normal operation.

Check components: Check all parts of the equipment, including cutters, transmission devices, bearings, bolts, etc., to see if there are signs of looseness, wear or damage. If the cutter is found to be severely worn, it should be replaced in time to ensure the shearing accuracy; loose bolts should be tightened in time to prevent equipment failure caused by looseness.

Lubrication and maintenance: Lubricate each lubrication point regularly according to the equipment's instruction manual. Generally speaking, transmission gears, chains, bearings and other parts need to be regularly smeared with lubricating oil or grease to reduce friction, reduce wear and ensure smooth operation of the equipment.

2. Regular maintenance

Deep cleaning: Perform a deep cleaning on the equipment at regular intervals. In addition to cleaning the surface, you also need to open the protective cover of the equipment and clean the key internal components to remove the oil, dust, and iron filings that have accumulated over a long period of time.

Precision detection and adjustment: Regularly check the shearing accuracy of the slitting machine, such as using a caliper or micrometer to measure whether the width of the strip after shearing is within the specified tolerance range. If precision deviation is found, it is necessary to adjust the tool gap, feeding mechanism, etc. in time to ensure that the equipment always maintains high-precision shearing performance.

Electrical system inspection: Have professional electricians regularly inspect the electrical system, including wires, cables, electrical components, etc., to see if they are aging, damaged, or have poor contact. Timely replace aging wires and damaged electrical components to ensure the safe and reliable operation of the electrical system and prevent equipment accidents caused by electrical failures.

3. Long-term maintenance

Equipment refurbishment: As the equipment is used for a longer period of time, some parts may become seriously worn or aged. At this point, the equipment needs to be refurbished, such as replacing worn blade shafts, bearing seats and other large parts, repainting the machine body, etc., to restore the performance and appearance of the equipment.

Technology upgrade: Pay attention to the development of slitting machine technology, and upgrade the equipment according to production needs and the actual situation of the equipment, such as replacing more advanced control systems, tool materials, etc., to improve the degree of automation and production efficiency of the equipment.

If you are interested in learning about the maintenance methods of high precision slitting machines, etc., welcome to visit www.wxjyequipment.com ! We have industry-leading technical dynamics and professional customer service, and look forward to cooperating with you to create a better chapter!