Longitudinal shear steel slitting machine equipment composition
Jul 28, 2025
Leave a message
The longitudinal shearing steel plate slitting machine is mainly composed of the following parts:
1. Unwinding device
It is usually composed of an unwinder and a tensioner. The unwinder is used to carry and unwind the steel coil, and the motor drives the steel coil to achieve stable unwinding. The tensioner can apply appropriate tension to the steel strip during the unwinding process to prevent the steel strip from loosening and ensure that it can enter the subsequent processing links in a stable state.
2.Guiding and leveling device
The guide device guides the steel strip to enter the slitting machine accurately to ensure that the steel strip does not deviate during operation. The leveling device is generally composed of multiple sets of leveling rollers, which is used to level the uneven steel strip. By applying different degrees of pressure on the upper and lower surfaces of the steel strip, the defects such as the waviness and sickle bend of the steel strip are eliminated, laying the foundation for subsequent accurate slitting.
3. Shearing device
This is the core part of the slitting machine, mainly including the cutter, cutter shaft and transmission system. The cutter is generally made of high-quality carbide or high-speed steel, with high hardness, high wear resistance and good toughness. The cutter shaft is used to install the cutter, and the drive system drives the cutter shaft to rotate at high speed, so that the cutter can cut the steel strip longitudinally. The drive system is usually composed of a motor, a reducer, a coupling, etc., which can provide stable power for the cutter shaft to ensure the smooth progress of the shearing process.

4. Waste edge processing device
During the stripping process, waste will be generated on the edge of the steel strip. The waste edge processing device is responsible for collecting and processing these waste edges. Generally, a waste edge coiler is used to roll the waste edges into coils for centralized processing, while also preventing the waste edges from affecting the working environment and equipment.
5. Winding device
It consists of a winder and a tension control system. The winder winds the slit narrow steel strip into a coil for easy storage and transportation. The tension control system can automatically adjust the winding tension according to the material, thickness and width of the steel strip, so that the steel coil is neat and tight after winding, and prevents loose coils or collapsed coils.
6.Electrical control system
It is the "brain" of the slitting machine, responsible for controlling the various actions and operating parameters of the equipment. The operator can set the slitting width, speed, tension and other parameters through the control panel. The electrical control system will accurately control the operation of each component according to these set values, realize the automatic operation of the slitting machine, and improve production efficiency and product quality.
If you are interested in the slitting machine for steel plates and are eager to obtain more detailed information, you are sincerely welcome to contact Jinye Complete Equipment for in-depth consultation.

