Maintenance of high speed leveling and shearing lines

Dec 01, 2024

Leave a message

1. Cleaning of high-speed leveling and shearing line equipment

After work every day, the dust, oil, metal debris and other debris on the production line should be cleaned up in time, especially the surface and inside of key equipment such as rolling mills and straightening machines, to prevent the accumulation of debris and affect the performance of the equipment.

Regularly clean the conveyor tracks, rollers and other parts to ensure smooth sheet conveying. Compressed air blowing or special tools can be used for cleaning.

2. Lubrication and maintenance

According to the requirements of the equipment manual, lubricate each lubrication point regularly. For example, use appropriate lubricating oil or grease for rolling mill bearings, straightening machine gears and other parts to ensure smooth operation of the equipment.

Pay attention to the oil level and quality of the lubricating oil, and add or replace the lubricating oil in time to avoid increased equipment wear due to insufficient or deteriorated lubricating oil.

3. Flat steel production line equipment inspection

Before starting up each day, conduct a comprehensive inspection of the equipment, including whether the connections between components are firm, whether the transmission device is normal, and whether the electrical system is stable.

Check the surface condition of the roller to see if there is wear, cracks or deformation. If there is any problem, it should be replaced or repaired in time to ensure the surface quality and dimensional accuracy of the flat steel.

Check the straightening effect of the straightening machine. If the flat steel is found to be bent or deformed, adjust the parameters of the straightening machine or check the condition of the straightening roller in time.

Regularly check the circuits and components of the electrical system to see if they are loose, damaged or aged. If there are any problems, they should be repaired or replaced in time to ensure the safety and reliability of the electrical system.

4. Safe Operation

Operators should strictly follow the operating procedures and must not operate the equipment in violation of regulations to avoid damage to the equipment or safety accidents caused by improper operation.

When performing maintenance on the equipment, the machine must be shut down and the power must be cut off to ensure personnel safety. When performing equipment maintenance, warning signs should be hung to prevent others from operating it by mistake.

5. Records Management

Establish equipment maintenance records, and record in detail the time, content, problems found and treatment methods of each maintenance.

This helps to understand the operating status of the equipment in a timely manner and provide a reference for subsequent maintenance.

According to the equipment's operating conditions and maintenance records, formulate a reasonable maintenance plan, conduct regular comprehensive inspections and maintenance of the equipment, and ensure that the equipment is always in good operating condition.

The daily maintenance and care of the flat steel production line is very important, which can not only extend the service life of the equipment, but also ensure the stability of production and product quality. If you want to know these methods, you can contact us at any time Jinye Complete Equipment!

steel sheet leveler machine

 

 

Send Inquiry