Maintenance of high-speed leveling and shearing line

Oct 15, 2024

Leave a message

Regular maintenance

1. Leveling roller inspection:

Regularly check the surface condition of the leveling roller to see if there is wear, cracks or deformation. If there is any problem, replace or repair it in time.

Adjust the parallelism and gap of the leveling rollers to ensure the leveling effect of the plate. Professional tools can be used for measurement and adjustment.

4High leveling machine

Shear tool inspection:Check the sharpness of the shearing tool. If the tool is found to be blunt, it should be sharpened or replaced in time.Check whether the installation position of the cutter is correct to ensure the cutting size accuracy. Adjust the cutter gap to meet the cutting requirements of different plates.

Electrical system inspection:Regularly check whether the connection lines of electrical equipment are loose or damaged. If there are any problems, they should be repaired in time.Check the working status of electrical components, such as contactors, relays, etc., to ensure their normal operation.Clean and maintain the electrical control system to prevent dust and oil from affecting its performance.

2. Hydraulic system inspection:

Check the sealing of the hydraulic system to see if there is any oil leakage. If there is any oil leakage, replace the seal in time.

Check the oil level and quality of the hydraulic oil. If the oil level is too low, add more oil in time. If the oil quality deteriorates, replace it in time.

Clean the filter of the hydraulic system regularly to ensure the cleanliness of the hydraulic oil.

Send Inquiry