Operation process after slitting line is powered on

The steel coil plate of the slitting line is processed into a special shearing equipment of the required width through high-speed slitting. What is the operation process of this equipment after it is powered on?
1. Ensure that the operators debugging the slitting line are familiar with the operating procedures, operate in strict accordance with the operating procedures, and have qualification certificates. This also includes operators not having long hair, wearing gloves when operating machines, and tying cuffs with clothing. This is to ensure operator reliability when operating the slitting line.
2. When feeding the slitting line feeding trolley, pay attention to the coordination of power and the fixed position of the feeding to prevent the raw materials from falling off and injuring the feet. At the same time, it is necessary to ensure that the position of the metal material on the uncoiler is accurate.
3. The slitting line must not knock the control door at will, and the slitting machine must not touch the transmission part with the body, hands, head, etc. When visually observing the operation, do not put your head too close to the material and the roller; do not lean your body against any part of the machine; at the same time, during the operation, the slitting line must not touch the roller with your hands.
4. When unloading, pay attention to the unloading arm pulley to prevent the unloading arm and winding shaft from falling off and injuring your feet.