Working principle of Sheet leveler

Sep 15, 2025

Leave a message

1. Based on the Bauschinger effect

The core of the leveling machine's work relies on the "Bausinger effect" of the material. In the early stages of processing and handling, metal sheets undergo plastic deformation due to uneven force, resulting in defects such as warping and wavy shapes. The Bausinger effect shows that when the loading direction changes during the plastic deformation of metal materials, the yield strength will decrease. The leveling machine uses this characteristic to apply repeated alternating bending stress to the sheet, allowing different areas of the sheet to alternately experience tensile and compressive deformation. ​

2. Multi-roller leveling process

Taking the multi-roller leveling machine as an example, the plate is fed into the roller system that is staggered up and down. The upper working rollers rotate actively, and the lower working rollers are either active or passive. The working rollers contact and apply pressure to the plate, and the plate is repeatedly bent when passing between the rollers. In the initial stage, the larger original curvature is gradually transformed into a single and smaller curvature under multiple reverse bending. For example, thicker steel plates require more working rollers to provide multiple bending to overcome their greater rigidity. ​

info-900-1264

3. Stress relief and leveling

As the plate moves forward in the roller system, the internal stress distribution tends to be uniform. During the repeated bending process, the surface and internal fibers of the plate are constantly adjusted due to the force. The fibers that were originally of different lengths and arranged in disorder are gradually stretched to similar lengths and tend to be arranged in parallel. The internal stress difference of the plate is reduced, thereby achieving flatness. When the plate passes through all the working rollers, its flatness meets the requirements and the leveling operation is completed. ​

4. Parameter adjustment to adapt to different boards

To adapt to plates with different thicknesses, materials and precision requirements, the leveling machine can adjust multiple parameters. The gap between the working roll and the support roll can be changed by a press-down device, such as hydraulic press-down, which can be precisely controlled to adapt to the thickness of the plate; the speed of the working roll can be adjusted by the motor of the transmission system according to the plate material and the leveling speed requirements; some leveling machines can also adjust the angle of the roller system to optimize the leveling effect for plates with specific deformation conditions.

If you are interested in the working principle of the cross leveling machine, we sincerely welcome you to visit our website: www.wxjyequipment.com!

 

 

Send Inquiry