Equipment Composition Of Slitting Machine Row

Oct 09, 2023

Leave a message

The equipment of the slitting machine train generally includes: uncoiler, guide device, uncoil tension device, cutting shear, threading table, looper, disc shear, guide roller, machine train transfer roller, imported clamping device, constant tension Coiling device, edge shredding machine, scrap truck, coiling machine, lining device, etc. Slitting machine trains generally have the following forms.
A. Single-entry looper slitting
This type of slitting has a looper set up in front of the shear. The methods of feeding the strip to the entrance looper include central drive uncoiling, tensioning uncoiling, floating roller controlled uncoiling, etc. This method can realize micro-tension or zero-tension shearing to avoid slipping of the cutting edge; at the same time, the uncoiler can achieve strip centering in the looper without the need for a centering device.
B. Single outlet looper slitting
This type of slitting has a looper installed after the shearing machine. The sheared strip is pushed by the shearer into a tension-free looper between the shearer and the tensioning device. For thin strips, an entry edge guide system may be required to ensure stable unwinding of the strip during shearing. This method can effectively avoid the problem of unsynchronized winding of each strip caused by the thickness difference, and realize the winding of the strip by controlling the winding tension; due to the setting of the outlet loop, the strip can flow out of the cutting edge freely, avoiding the tension. The wear of the strip on the cutting edge affects the life of the cutting edge; at the same time, because there is no tension at the outlet, phenomena such as strip necking are avoided. Single outlet loopers are commonly used.
C. Double looper longitudinal cutting
Double looper slitting is a combination of entrance looper slitting and outlet looper slitting. After leaving the coiler and before entering the shearing machine, the strip is fed into a free looper by an uncoiler or a pinch roller device or a tensioning device. The sheared strip is sent to another machine after leaving the shearing machine. looper and then into the tensioner. Therefore, this slitting method is called "double looper" slitting. With this form of slitting, the slitting machine is only used to split the strip, thus eliminating the possibility of the strip slipping on the scissor edges. This method neutralizes the characteristics of single-inlet looper and single-outlet looper, and is suitable for shearing thin and soft strips.

Send Inquiry