How to achieve safe production at the slitting line?

When the slitting line is turned on, select forward and reverse rotation first after the emergency stop is turned on. During operation, forward and reverse rotation cannot be selected, and the slitting line must be stopped first. Be sure to turn on the fan first and then start the main unit. When shutting down, press the main unit to stop first and then turn off the fan. If the order is wrong, there is a possibility of damaging the appliance.
When we operate the slitting line, we cannot ignore the important issue of safety.
How to achieve safe production requires starting from the following 6 points:
1. When the slitting line is turned on, select forward and reverse rotation first after turning on the emergency stop. During operation, forward and reverse rotation cannot be selected, and the slitting line must be stopped first. -Be sure to turn on the fan first and then start the host. When shutting down, press the main unit to stop first, and then turn off the fan. If the order is wrong, there is a possibility of damaging the appliance.
2. After using the slitting line for a long time, check whether any screw nuts are loose. If found, tighten them with a wrench. If you encounter professional problems, you must ask professionals to handle or inquire.
3. Pay attention to the maintenance of the slitting line. Wherever there is a grease nipple, add butter once a month. Mainly to lubricate the bearings! Pay attention to the cleanliness of the roller surface, and allow welding slag, short sheets or other things to fall between the rollers to avoid damaging the leveling roller.
4. When someone is inspecting, repairing or refueling the slitting line, make sure that all the power to the machine is cut off. When turning on the machine, you should also pay attention to whether anyone is too close to the machine.
5. The slitting line operator needs to coordinate with the feeding personnel when operating on the operation panel. If speeding occurs, turn off the power immediately. There should be no less than three operators.
6. Establish safety awareness and pay attention to personal safety. All rotating parts should not be in close contact! When feeding sheet materials into the slitting line, people's clothes or hands should not be too close to the rollers. If the speed of the slitting line suddenly increases, do not drag the sheet with force to avoid inertial force being involved in the machine.
The slitting line is suitable for longitudinal shearing of metal strips and rewinding the slit narrow strips into rolls. It has the characteristics of easy operation, high cutting quality, high material utilization, and stepless adjustment of cutting speed. .