What Are The Improvements in Productivity Of Slitting Machines?
Oct 19, 2023
Leave a message
As slitting machines are used more and more widely, people are no longer satisfied with their basic working performance. Some slitting machine manufacturers have been working on improving equipment productivity. Due to the continuous improvement of technical level, small achievements have been made in this area, which are specifically reflected in the following aspects.
The slitting machine can not only complete basic shearing work, but also significantly improves labor saving, improves material flow, improves shearing accuracy and incision quality, and enhances safety. So how are these series of productivity improvements achieved? In fact, the secret lies in the related products of the slitting machine, such as:
The alignment stop arm and support arm of the slitting machine. The slitting machine can be used for trimming and straightening. It is used as a front stopper and supports longer sheets, which are all contributed by its alignment stop arm. The support arm is mainly the front support material of the slitting machine. Not only that, it can also be used together with the appropriate front baffle to measure the effect of the sheared parts.
In addition to supporting the front stop arm and support arm, the sheet support device of the slitting machine can also play the same role. The difference is that this device is installed behind the blade, so that the material resists the backstop and supports the material to prevent the material from sagging and ensure accurate incision position.
in lubrication systems. There are manual centralized lubrication systems and automatic lubrication systems in the slitting machine. It can provide appropriate amount of lubrication to multiple lubrication points at the same location. Good lubrication degree makes the equipment use more smoothly.
Another very important point is the adjustment of the gap between the cutting edges of the slitting machine. It also has two types: manual and automatic. No matter which one it is, the knife edge gap can be adjusted very well so that it can match the thickness, size and type of the material to be cut, and improve the shearing effect.
There are many, many more. Although these devices may not be eye-catching on their own, when used on a slitting machine, the effect will be obvious.

