SUS Steel Sheet Slitting Line
Description
Technical Parameters
Wuxi Jinye Complete Equipment Co., Ltd. is one of the leading manufacturers and suppliers of sus steel sheet slitting line in China, also supports OEM service. Please feel free to buy durable sus steel sheet slitting line made in China here from our factory. For price consultation, contact us.
Introduction
Jinye Complete Equipment is professionally developed Stainless steel, compared with normal carbon steel Yield strength ≤270Mpa Tensile strength ≤465Mpa, has much higher strength and better appearance, which requires higher precision stronger slitting line machines.
Product Specification
|
SUS category |
SUS grade |
TS (Mpa) |
YS (Mpa) |
|
Austenite |
SUS200: 201, 202 |
500-700Mpa |
270-400Mpa |
|
Ferrite |
SUS400: 405, 408, 409,410, 420, 430, 434, 436, 442, 444 |
415-550-760Mpa |
500Mpa |
|
Martensite |
SUS400: 410, 410S, 414, 416, 420, 440 |
450-750-1400Mpa |
500Mpa |
|
Dualphase |
2205, 2304, 2507 |
600-800Mpa |
310Mpa |
|
Precipitation Hardening |
600: 17-4, 15-5 |
1100-1380Mpa |
200Mpa |
Product Characters
1. Stainless Steel Sheet Machine structures are about double strong as plain carbon steel slitting machine.
2. Drive motors are much more powers for the same number of SUS steel Sheet Slitting Line Machine.
3. Paper winding device, film or paper lamination online.
4. Seamless mandrels to support stainless steel coils.
5. All passover rollers are PU coated.
6. Slitting tools specially suitablefor stainless steel slitting.
7. Scrap winders are vertical drums, easy to discharge.
8. Portal frame recoiling separator.

Parameters of 3 x 1600 SUS Slitting Line
|
Raw Material |
AISI 409, AISI 430, AISI 201, AISI 304, AISI 310, AISI 316, AISI 321, AISI 904, AISI 2205 and etc. |
|
Tensile strength σb≤800N/mm2, yield strength ≤450N/mm2 |
|
|
0.3-3.0 x 300-1600mm x 15T coils |
|
|
Finished product |
3mm thickness, max 12 strips; ≤1.5mm, max 30 strips |
|
Minimum 30mm width, Φ508mm, Φ1600mm |
|
|
Φ508mm inner diameter, Φ1600mm outer diameter, max 15T weight |
|
|
Slitting Machine |
Active slitting or pull slitting, DC drive |
|
Slitting speed: max 180m/min. Threading speed: 0-15m/min |
|
|
Total 400KW, land area 30m x 10m |
|
|
Slitting precision |
Slit widths tolerance≦0.10mm |
|
Slit camber≦0.5mm/m for strip of wider than 300mm, ≦1.0mm/m for strip of <300mm |
|
|
Slit burrs ≦0.05mm |
|
|
Recoil staggering ≦±0.5mm |
|
|
Recoil turriform ≦±2.0mm |
Composition and Making
|
Composition |
Making configuration |
|
1. Coil storing saddle |
Q235-A steel welded assembly, annealing treatment, covered with nylon plate. |
|
2. Coil loading car |
Frame and base: Q235-A steel welded assembly, annealing treatment. |
|
3. Single mandrel uncoiler |
Frame: welded assembly of Q235-A steel plates. |
|
4. Coil head traction press roller Coil head Straightening roll and shoveling blade |
Steel tube, PU coated, 40mm wide x 10mm deep slot in middle. Bracket is welding assemly of Q235-A steel plates, annealing treated. |
|
5. Pinch feeder and 5 rolls preleveler |
Frame and base: Q235-A steel welded assembly, annealing treatment. |
|
6. Coil head Shear |
Uppe blade apron and lower blade apron: Made of Q345 (16Mn) steel plates by welding, high temperature annealing. |
|
7. Pit loop 1 |
Dimensions 4000mm L × 3300mm D |
|
8. Press rollers and side guide |
The base, frame and bracket: welded assembly of Q235-A steel plates, annealing treated. Vertical rolls for side guide: GCr15 steel, tempering, intermdiate frequency treated, surface hard chrome coating, screw rod 45# steel tempering HB250-275, nuts ZQSn6-6-3. |
|
9. Slitter |
Knife arbors: 42CrMo forgin steel, tempering HB280-300 after rough machining, surface MF quenching HRC50-55, hard chrome coating and polishing. |
|
10. Edge scrap winder and strips tail press |
Frame: Q235-A steel plates of welding and then annealing. |
|
11. Pit loop 2 |
The same as pit loop1, dimensions 3800mmL×5000mmD |
|
12. Pre separator, Plate type tensioner |
Frame and Tension beams: welding assembly of Q345 (16Mn) steel plates, annealing treated. |
|
13. Rear shear, deflector roller |
Uppe blade apron and lower blade apron: made of Q345 (16Mn) steel plates by welding, high temperature annealing. |
|
14. Separating overarm and recoiler |
Gearbox: Welding box of Q345 steel plates, anealing treated, machined by CNC center |
|
15. Coils Unloading car |
Frame and base: Q235-A steel welded assembly, annealing treatment |
|
16. Discharging turnstile |
Frame and base: Q235-A steel welded assembly, annealing treatment |
|
17. Hydraulic system |
Vitory or Rexroth valves, seamless steel pipes |
|
18. Pneumatic system |
Airtac valves and cylinders |
|
19. Electric control system |
Siemens PLC and HMI, Yoko sensors, Chint or Schneider parts, Inovance AC inverter |
Hot Tags: sus steel sheet slitting line, China sus steel sheet slitting line manufacturers, suppliers, factory, quality metal slitting blade, new metal slitting machinery, refurbished metal slitting blade, durable metal slitting die, workshop metal slitting machinery, heavy duty metal slitting tool
Previous
Aluminium Coil Slitting LineSend Inquiry














